Black Oak 2-Piece Connect Cable [WH2]

Black Oak's 2-piece Connect Cable (WH2) is a fantastic wiring solution. It lets you connect two lights under 10 inches long to one wiring harness. With this cable, you can power all the lights using just one switch. It's ideal when upgrading fog lights to Black Oak's Pod Series lights. Just remember to upgrade the fuse in the wiring harness to the right size. The fuse should be slightly above the amp draw of the lights. For example, if you run two 40w Black Oak pods with a 2.8 amp draw each (total 5.6 amps), you'll need a 10 amp fuse. The cable measures 31 feet end to end and is sold individually. It's a parts type product. The box dimensions are 1'H x 5'W x 7'L and it weighs 0.1 lbs. The UPC is 850044517428.

Using the Black Oak 2 - Piece Connect Cable is easy. First, find two lights that are under 10 inches in length. Then connect these lights to the cable and attach the cable to one wiring harness. Once everything is connected, you can turn on all the lights with just one switch. When using this cable, especially when upgrading fog lights to Pod Series lights, make sure to check the amp draw of your lights. The fuse size in the wiring harness should be slightly larger than the total amp draw of the lights. For example, if your lights draw a total of 5.6 amps, use a 10 amp fuse. As for maintenance, keep the cable clean and dry. Avoid pulling it too hard or bending it sharply, which could damage the internal wiring. Also, store it in a cool and dry place when not in use.