Egis 50A Surface Mount Circuit Breaker - 285 Series [4703-050]

50A Surface Mount Circuit Breaker - 285 Series

This amazing 50A Egis circuit breaker is your best bet for protecting electrical circuits from short - circuits and over - current loads. It stops wire insulation from overheating and getting destroyed.

Applications:

• Get dual functionality in one compact and reliable solution with automatic circuit protection and manual on/off switching.
• Conveniently isolate circuits and maintain load circuits. It can be mounted next to battery systems anywhere.

Features:

• Sealed against dust and water, ensuring reliable circuit protection throughout the electrical system's life.
• High Voltage (48 Vdc) Rating supports 12 and 24 VDC applications and offers advanced protection for 36 and 48 VDC.
• With 6,000 cycles at full current, it has high electrical/manual switching endurance.
• High Interrupt Current safely protects circuits connected to large paralleled battery banks with lots of power.
• Backed by a 4 - Year Warranty, Egis ensures it meets your needs.

Specifications:

• Continuous Current Amps: 50
• Max Voltage: 48
• Cycling Endurance: 6,000
• Interrupt Current @16 VDC (Amps): 5,000
• Interrupt Current @28 VDC (Amps): 3,000
• Ingress Protection Rating: IP67

Focal Features:

ON/OFF High Visibility Controls

Sealed against dust and moisture, suitable for high - temperature installations everywhere.

Integrated Terminal Insulators

Prevent accidental shorts from positive terminals to grounded surfaces.

Stainless Steel Hardware / Serrated Flange Nuts

Resistant to corrosion and vibration for harsh environments.

Proudly Made in the USA

Crafted in the USA with high - quality components.

WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more info, go to P65Warnings.ca.gov.

Specifications:

• Amperage: 50a
• Box Dimensions: 3'H x 3'W x 5'L WT: 0.35 lbs
• UPC: 850035199138

Quick Guide (pdf)

Using the Egis 50A Surface Mount Circuit Breaker is quite straightforward. First, find a suitable location near your battery system to mount it. It can be installed in various positions as long as it's close to the battery. The on/off controls are highly visible, so you can easily turn the circuit on or off. When using it, always make sure the amperage doesn't exceed 50A and the voltage stays within the 48V limit. Regarding maintenance, since it's sealed against dust and water, it's pretty low - maintenance. But it's a good idea to check it periodically for any signs of corrosion, especially if it's used in harsh environments. The stainless - steel hardware and serrated flange nuts are resistant to corrosion and vibration, which helps in long - term use. Also, be aware that this product contains chemicals that can be harmful according to California regulations. If you have any concerns, refer to P65Warnings.ca.gov for more information. And don't forget, it comes with a 4 - year warranty, so you can use it with confidence.