Collinite 870 Marine Fiberglass Fleetwax - 16oz [870-16OZ]

Collinite's top - selling, award - winning marine product is a must - have for large fleet applications. When saving time and money is crucial without sacrificing performance, this wax is the answer. It's a versatile and user - friendly single - step formula. It can get rid of film, light oxidation, discoloration, and stubborn stains on fiberglass surfaces. After application, it leaves a radiant, high - gloss finish and a long - lasting protective coating that guards against weather, UV rays, and salt spray for months. **Features**: - Eliminates tough stains that regular washes can't handle. - Combines two steps into one. - Offers 2 - 3 months of weather protection. - Can be used before applying final - step waxes. **Applications**: - Ideal for exterior marine detailing. - Average spread/coverage: 500 - 1,000 sq. ft. - Suitable for hand, dual - action, and rotary use. **Application by hand**: - Put a nickel - sized amount of the product on an applicator pad. - Rub it well on a section no larger than 2×2 ft. Use firm pressure and rub until just before it starts to dry. Then buff it off with a microfiber towel for a crisper, darker, and more reflective finish. **Application by machine**: - Place 5 small pea - sized dots on the buffing pad. Don't over - saturate the pad; only a small amount is needed. - Put the pad on the panel and turn on the buffer at 5800 opm. Make 2 - 3 passes on a section no larger than 2×2 ft with firm pressure. Lower the speed to 4800 opm and make 2 - 3 more passes with less pressure. Buff until just before it dries; never dry - buff. - Wipe off the residue to reveal a clean, glossy, and beautiful finish. **Specifications**: - Type: Fiberglass - Box Dimensions: 2'H x 2'W x 8'L, WT: 1.15 lbs - UPC: 638234008709

Using this Collinite 870 Marine Fiberglass Fleet Wax is a breeze. First, decide if you'll use it by hand or with a machine. If you're using it by hand, take a nickel - sized amount on an applicator pad. Rub it over a small area, no bigger than 2×2 ft, using firm pressure. Keep rubbing until it's almost dry, then buff it off with a microfiber towel for a great finish. For machine application, put 5 small pea - sized dots on the buffing pad. Don't use too much product. Start the buffer at 5800 opm and make a few passes on a 2×2 ft section with firm pressure. Then lower the speed and make some more passes with less pressure. Remember, don't let it dry completely while buffing. After that, just wipe off the residue. As for maintenance, you don't have to worry too much. This wax provides 2 - 3 months of weather protection, but you can re - apply it when you notice the finish starting to fade. Also, always store it in a cool, dry place. Avoid getting it on non - fiberglass surfaces as it's designed specifically for fiberglass. That's all you need to know to keep your marine fiberglass looking great!