Ancor 3/4 x 48 Yellow Heat Shrink Tubing

Ancor 306948 Heat Shrink Tubing, yellow, 1 piece. Measuring 3/4 in (19 mm) in diameter and 48 in (122 cm) long, it shrinks to 1/4 in (6.4 mm). Made of cross - linked polyolefin, it's stronger than PVC and won't burn like PVC. The heat - activated adhesive lining seals against salt water, oil, acids, and sunlight, and provides strain relief. With a high shrink ratio of 1/3, it shrinks at 257°F / 125°C and operates in a temperature range from - 40°C to 110°C. It's UL 224 approved. Each package item has a height of 20.00 in, width of 0.810 in, length/depth of 0.810 in, and weighs 2.080 oz.

Using this heat shrink tubing is easy. First, cut the tubing to the length you need. Then, slide it over the area you want to cover. Use a heat source like a heat gun or a hair dryer to apply heat evenly around the tubing. Keep the heat source moving to avoid overheating in one spot. The tubing will start to shrink and form a tight seal once it reaches 257°F / 125°C. When using, make sure you're in a well - ventilated area. Avoid touching the tubing immediately after heating as it will be hot. For maintenance, store the tubing in a cool, dry place away from direct sunlight and chemicals. If you notice any signs of damage or wear, replace the tubing for optimal performance.