Ancor 306648 Red Heat Shrink Tubing, 3/4" x 48", 1 Piece
Model: 306648
- Cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC.
- Heat-activated adhesive lining seals against salt water, oil, acids, and sunlight, and relieves strain.
- High shrink ratio - shrinks to 1/3 of its original size.
- Shrinks at 257°F / 125°C.
- Operates from -40°C to 110°C.
- UL 224 certified.
One package contains a 48-inch (122 cm) long red tubing with a 3/4-inch (19 mm) diameter that shrinks to 1/4-inch (6.4 mm).
Specifications| Each in Package Height (in) * | 20.00 |
| Each in Package Width (in) * | 0.810 |
| Each in Package Length/Depth (in) * | 0.810 |
| Each in Package Weight (oz) * | 2.080 |
Using this Ancor heat shrink tubing is easy. First, slide the tubing over the object you want to cover. Then, use a heat source like a heat gun to apply heat evenly around the tubing. The tubing will start to shrink once it reaches 257°F (125°C) and will shrink to 1/3 of its original size. Make sure to heat it slowly and evenly to get a nice, tight fit. When using it, be careful as the heat can be high. Don't use it near flammable materials. For maintenance, keep it in a cool, dry place away from direct sunlight. This will help it stay in good condition for a long time. And remember, it's resistant to salt water, oil, and acids, but if it gets really dirty, you can gently clean it with a mild soap and water solution.
