Ancor 307148 Heat Shrink Tubing, 1' x 48', Black, 1pc
Model: 307148
- Made of cross-linked polyolefin, it's stronger than PVC and won't burn like PVC.
- The heat-activated adhesive lining seals out salt water, oil, acids, and sunlight. It also relieves strain.
- It has a high shrink ratio, shrinking to 1/3 of its original size.
- Starts shrinking at 257°F / 125°C.
- Operates well from -40°C to 110°C.
- Meets UL 224 standards.
This package includes 1 black section that's 48 inches (122 cm) long with a 1-inch (25.4 mm) diameter, shrinking to 5/16 inches (7.9 mm).
Specifications| Length (Imperial) | 48 in |
| Diameter (in) | 1 |
| Shrinks To (Imperial) | 5/16 in |
Using this heat shrink tubing is easy. First, choose the right size for your project. Slide the tubing over the area you want to cover. Then, use a heat source like a heat gun. Keep the heat source moving evenly around the tubing. The tubing will start to shrink when it reaches 257°F (125°C). It'll shrink to 1/3 of its original size. Make sure to keep the heat source at a safe distance to avoid overheating. This tubing can handle temperatures from -40°C to 110°C, so it's suitable for many environments. When not in use, store it in a cool, dry place. The adhesive lining provides a good seal against salt water, oil, acids, and sunlight, but try to avoid long - term exposure to harsh chemicals. Also, be careful as it's stronger than PVC but can still be damaged if handled roughly.
