Product Description
The Furuno DRS12AX 12Kw X-Band Radar with a 15m cable is a game - changer. It features a 12kW power output, delivering enhanced target detection for both short and long distances. With a minimum detection range of just 20 m, it's incredibly precise. The Fast Target Tracking™ function, adopted from the commercial Radar FAR3000, allows you to instantly see target course and speed vectors at the press of a button, increasing vessel safety. Its Bird Mode is also a great addition. The new pedestal unit is 20% lighter than previous models and has a new, low - noise motor. You don't need a PSU, which cuts down on costs. Installation is a breeze without opening the pedestal unit, thanks to the new smart - connector cable. It's compatible with NavNet TZtouch and NavNet TZtouch2. It's a 24V system, so you'll need a converter for 12V power systems. This radar can detect targets up to 96 nautical miles away. The antenna options of 4 and 6 feet are sold separately. It has a horizontal beam of 1.9° with a 4' antenna and 1.4° with a 6' antenna, and a vertical beam of 22°. It also supports dual - range scanning. The box includes a scanner unit, a fuse, corrosion - proof pads, nuts, washers, studs, an installation manual, a mounting template, an environmental data sheet, and a 15M signal/power cable assembly.
Using the Furuno DRS12AX 12Kw X - Band Radar is straightforward. First, make sure to check the power source. Since it's a 24V system, if you have a 12V power system on your vessel, you'll need to connect a converter. Next, install the radar using the included installation manual and mounting template. You don't need to open the pedestal unit for installation, which makes the process easier. When it comes to using the radar, you can take advantage of the Fast Target Tracking™ function by simply pressing a button to get instant information about target course and speed. The Bird Mode can be useful in certain situations. For maintenance, keep the radar clean and check the cables regularly. Since the pedestal unit has a new, low - noise motor, there's no need for frequent servicing. Also, make sure to check the antenna for any signs of damage. If you want to change the antenna, remember that the 4 and 6 - foot options are sold separately.
