This E-32-IP device with EWP offers outstanding features. It has 2 Amp relay contacts for door/gate or SL-2 Strobe Light control. A blue 'Call Connected' LED indicator shows the call status. It's SIP compliant and PoE powered. The Automatic Noise Canceling (ANC) feature makes it work well in noisy places. VoIP audio detection gets rid of the 'Push to Talk' mode, enabling hands - free operation. It uses T - 10 Torx security screws for more security and has laser - etched graphics. You can program it to dial up to 5 numbers and it cycles through backup numbers when busy or no answer. It hangs up on busy signals, time - outs, or touch - tone commands. The included programming software and network - downloadable firmware allow for easy setup. It's remotely programmable and has diagnostics for testing mic, speaker, and relay. It flush - mounts with a double - gang electrical box. With an extended temperature range from - 40°F to 140°F and enhanced weather protection meeting IP66 rating, it can withstand harsh conditions. It has a maximum sound pressure of 90dB SPL @ 1m, dimensions of 5.0 x 5.0 x 2.25 (127mm x 127mm x 57mm), and a shipping weight of 2.1 lbs. It can handle up to 100% humidity and is made of 14 - gauge 316 stainless steel with a #4 brushed finish. The SPDT relay contact rating is 2A @ 30VDC / 1A @ 125VAC, 250VAC maximum. It supports audio codecs G711u, G711a, G722 and complies with IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE - TX with auto - cross over, and has (1) RJ45 10/100 Base - T and (3) gel - filled butt connectors.
Using the E - 32 - IP with EWP is easy. First, connect it to your network using the RJ45 port. The PoE power will start it up automatically. To program it, use the included software. You can set up to 5 phone numbers for it to dial. When there's a call, the blue LED will show that the call is connected, and you can use it hands - free. In noisy environments, the ANC feature will help you have clear conversations. When mounting, make sure to use the T - 10 Torx security screws for added safety and flush - mount it with a double - gang electrical box. Remember, this device can work in a wide temperature range from - 40°F to 140°F and can handle up to 100% humidity. For maintenance, keep it clean. If you need to update the firmware, you can do it through the network. If you encounter any issues, use the diagnostics to test the mic, speaker, and relay.
