Collinite SLICKR 3-In-1 Ceramic Detailer [150]

SLICKR 3-In-1 Ceramic Detailer

This super - versatile product is a booster, drying aid, and topper all in one. It features a SiO2 + polymer structure, delivering a hyper - slick finish and fast hydrophobic results.

No. 150 Slickr Ceramic 3 in 1 quickly and easily gives automotive exterior surfaces like paint, glass, wheels, and trim hydrophobic water - beading properties and a high - gloss, super - slick look. With its SiO2 - polymer structure, it can be used alone as a protectant or as a booster over existing wax, sealant, or ceramic/graphene coatings, enhancing shine and adding protection. It's also great as a drying aid, topper, clay lubricant, or final inspection detailer, removing light dust and smudges. It's safe for various exterior parts of your car.

Features:

• Comes in 16 fl oz
• Average spread/coverage is 600 - 1,000 sq ft

TIPS: Always test the product on a small, hidden area first to get the result you want.

As a lubricating drying aid: After washing when the vehicle surface is still wet, spray Slickr twice on a 3×3 ft panel at a time. Use a microfiber towel to wipe the panel until dry. Flip or change towels as needed. Do this on all painted surfaces and glass.

As a clay lubricant: Spray Slickr twice directly on a Colli - Flex Decon Towel (rubberized side). Move the decon towel over a 3×3 ft panel in a cross - hatch pattern with light pressure. Add more product to keep it slick and avoid scratching. Wipe off the product with a dry microfiber towel. Repeat on all painted surfaces and glass.

Use:

• For paint, glass, wheels, and trim
• Gives an extremely slick finish
• Removes light dust, fingerprints, and smudges
• Provides up to 3 months of hydrophobic protection
• Easy to apply and remove for a high - gloss shine
• Can be used as a clay lubricant, drying aid, or for show - car prep
• Can be used as a topper over waxes, sealants, ceramic coatings, and paint protection film

Not For Use On:

• Interior surfaces like leather, vinyl, and dash
• Surfaces with defects, swirls, or scratches
• Heavily soiled or contaminated surfaces

Specifications:

• Type: Ceramic Coating
• Box Dimensions: 3'H x 3'W x 10'L WT: 1.15 lbs

Hey there! Using Collinite SLICKR 3 - In - 1 Ceramic Detailer is a breeze. First, always test it on a small, hidden area of your car to make sure you get the look you want. If you're using it as a lubricating drying aid, wash your car first. While the surface is still wet, spray it twice on a 3×3 ft panel. Then, grab a microfiber towel and wipe the panel dry. Flip the towel if it gets dirty and change it when it's saturated. Do this for all the painted parts and the glass of your car. For using it as a clay lubricant, spray it twice on the rubberized side of a Colli - Flex Decon Towel. Gently move the towel over a 3×3 ft panel in a cross - hatch pattern. Add more product if it starts to get dry to keep it slick and prevent scratching. After that, wipe off the product with a dry microfiber towel. Repeat this process on all the painted surfaces and glass. This product is great for your car's paint, glass, wheels, and trim. It gives an extremely slick finish, removes light dust, fingerprints, and smudges, and offers up to 3 months of hydrophobic protection. You can use it as a stand - alone protectant, a booster over existing coatings, a drying aid, a clay lubricant, or for show - car prep. But remember, don't use it on interior surfaces like leather, vinyl, and dash. Also, avoid using it on surfaces with defects, swirls, scratches, or if they're heavily soiled or contaminated. Enjoy using your Slickr 3 - In - 1 Ceramic Detailer to keep your car looking great!