Collinite 920 Fiberglass Marine Cleaner - 64oz [920-64OZ]

Collinite 920 64oz Fiberglass Marine Cleaner

This amazing pre - wax product, No.920, works quickly. It can effectively get rid of mild - moderate UV oxidation, chalkiness, discoloration, and tough stains on fiberglass, leaving a smooth surface. This easy - to - use compound restores the original color and gloss of fiberglass, making it a breeze to apply Collinite’s final - step waxes. It also enhances the wax bond, spread/coverage, and durability.

Features:

• Eliminates mild - moderate oxidation
• Removes black streaks
• Cleans tough stains that normal washes can't handle
• Prepares a clean and smooth surface for subsequent waxing

Applications:

• Can be used by hand, with a dual - action tool, or a rotary machine.
  • Average spread/coverage: 250 - 500 sq. ft. (for the 16oz version)

  Application By Hand:

  • Put a nickel - sized amount of the cleaner on an applicator pad.
  • Rub it well on a section no larger than 2×2 ft. Use firm pressure and keep rubbing until just before it starts to dry. Then buff it off with a microfiber towel for a crisper, darker, and more reflective finish.

  Application by machine:

  • Place 5 small pea - sized dots on the buffing pad. Don't over - saturate the pad; only a small amount is needed.
  • Put the pad on the panel and turn on the buffer at 5800 opm. Make 2 - 3 passes with firm pressure on a section no larger than 2×2 ft. Then lower the speed to 4800 opm and make 2 - 3 more passes with less pressure. Buff until just before it dries, and never dry buff.
  • Wipe off the residue to reveal a clean, glossy, and beautiful finish.

  *Sold individually

Using Collinite 920 Fiberglass Marine Cleaner is easy. You can use it by hand or with a machine. If using by hand, put a nickel - sized amount on an applicator pad and rub it on a 2×2 ft section with firm pressure until almost dry, then buff it off with a microfiber towel. For machine use, place 5 small pea - sized dots on the buffing pad, start at 5800 opm and make a few passes with firm pressure, then lower the speed and make more passes with less pressure. Remember not to over - saturate the pad and never dry buff. This cleaner helps remove oxidation, black streaks, and tough stains. After using it, it leaves a smooth surface for waxing. Keep it in a cool and dry place for best results.