Echonautics BT70H600: 130 - 210kHz High CHIRP 600 - watt 12° Tilted Element Transducer
Model: BT70H600 - 12
This low - profile thru - hull CHIRP transducer is designed to match your vessel's deadrise at a specific angle. It's perfect for minimizing drag and performing well at high speeds.
Specifications| Function | Measures depth and temperature |
| Frequency | CHIRP 130 - 210kHz |
| Mount style | Thru Hull |
| Tilt/deadrise | 12° tilted element, suitable for 8° to 15° hull deadrise |
| Material | Bronze |
| RMS Power | 600 watts |
| Hole diameter | 2.38 in |
| Cable length | 27 ft |
| Temperature sensor | NTC |
| Accoustic window | Urethane |
Using the Echonautics BT70H600 - 12 is easy. First, make sure your vessel's hull deadrise is between 8° and 15°. Then, install the transducer through the hull using the 2.38 - inch hole diameter. Connect the 27 - foot cable properly. When you're out on the water, this transducer will measure depth and temperature for you. Remember, it's designed to work well at high speeds with minimal drag. As for maintenance, regularly check the bronze material for any signs of corrosion. Keep the urethane acoustic window clean to ensure good performance. Also, check the NTC temperature sensor occasionally to make sure it's working properly. If you notice any issues, consult a professional for further assistance.
