Product Description
The Furuno FA70 Class B+ AIS is a top - notch marine device. Model FA70 comes with a Silent Mode that you can easily turn on or off. It's compact and lightweight, offering a wider range and faster transmit performance. The internal VHF splitter gets rid of the need for a separate antenna. It supports switchable SO - TDMA and CS - TDMA. There are an NMEA2000 port, 2 NMEA0183 ports, and a USB (micro B) port. You can do the initial setup via the NMEA2000 network (TZT2/TZT3). This AIS transceiver has multiple ports for simple connection to your NavNet, AIS - capable Radar, Chart Plotter, or favorite navigation software. In congested waterways, low - visibility conditions, or heavy seas, AIS is crucial. It graphically shows vessel information like name, call sign, position, course, and speed, helping you monitor traffic easily. Since it doesn't need line - of - sight, you can spot AIS - equipped vessels on your electronics before seeing them on the water. The FA70, a complete Class B+ (SOTDMA) AIS, transmits vessel information faster and more powerfully than existing Class B units. SOTDMA ensures an AIS time slot, making you visible in crowded waters. It has an internal Hi - Accuracy GPS Receiver with WAAS differential (DGPS) capability for high - precision information. The built - in VHF Antenna Splitter lets it share your VHF Radio's antenna, simplifying installation. Note that it's a transmitting device and needs an AIS VHF Compatible Antenna, just like other AIS systems. What's in the box: FA70, Antenna Unit, 2 5A Fuses, 2m NMEA2000 Cable, Power Cable, hardware, Operators Manual, and Software.
Using the Furuno FA70 is quite straightforward. First, connect it to your NavNet, AIS - capable Radar, Chart Plotter, or navigation software through the available ports. You can set it up initially via the NMEA2000 network if you have a TZT2 or TZT3. To start using the Silent Mode, just switch it on or off as you need. When it comes to the antenna, you don't need a separate one thanks to the internal VHF splitter. However, remember that it requires an AIS VHF Compatible Antenna as it's a transmitting device. In terms of maintenance, keep it dry and away from extreme temperatures. Check the fuses regularly to make sure they are in good condition. If you face any issues, refer to the Operators Manual that comes in the box. Also, keep the software up - to - date for the best performance.
