Clipper Supernova Combi LED Tricolor Masthead Anchor Light [CL-CTC]

Supernova Combi Tri and Anchor L.E.D Mastlight is a top - notch choice for vessel navigation. It uses high - efficiency LEDs, which means long - lasting performance and low power consumption. The tough polycarbonate shell protects it from the elements, and a Gore - Tex membrane vent equalizes pressure on the seals. The Combi light has a simple two - wire connection. Connect the red wire to positive and the black wire to negative to light up the tricolor light; reverse the connections to turn on the anchor light. A rotary switch is provided for easy supply reversal. In the central position, both lights are off. You can switch clockwise or anticlockwise to select the lighting you need. If you prefer a toggle or rocker switch to match existing ones, a centre - off two - pole changeover switch can be used. Technical details include a supply voltage of 10 to 20 volts for full brightness, a supply current of 200 mA at 12 volts (90% less than equivalent incandescent lamps), a minimum night - time visibility of 2 nautical miles (25 degrees above and below the centerline), waterproofness of IP65 (water jets) and IP67 (submersion), dimensions of 91 mm diameter x 133 mm height (including mounting), and specific light configurations. These Supernova navigation lights are for vessels up to 12 metres long, comply with CE generic EMC standards, and are waterproof. Note that this product may not be returned to the original purchase point. Contact the manufacturer directly for any issues. Owner's Manual (pdf) and Brochure (pdf) are available.

Using this Supernova Combi LED Tricolor & Anchor Masthead Light is easy. First, connect the red wire to the positive and the black wire to the negative to light up the tricolor light. To turn on the anchor light, just reverse the wire connections. The supplied rotary switch makes it simple to change the lighting configuration. If you want, you can use a centre - off two - pole changeover switch to match your existing switches. When using, make sure the supply voltage is between 10 and 20 volts for full brightness. Remember, this light is designed for vessels up to 12 metres long. In terms of maintenance, the polycarbonate shell and Gore - Tex membrane vent protect it well, but it's still a good idea to check the seals regularly for any signs of wear. And don't try to return the product to the original purchase point. If you have any problems, contact the manufacturer directly.