Product Description
The Blue Sea Systems m-Series Mini On-Off Battery Switch in black comes with a knob. Model: 6006200-BSS. It features tin-plated copper studs for great conductivity and corrosion resistance. These studs fit 3/8' (M10) ring terminals and have a 7/8' (22mm) length to accept multiple cable terminals. The one-piece terminal stud design won't loosen over time. An isolating cover with snap-on sections protects the rear contacts. The case allows surface, rear, or front panel mounting. It's waterproof (rated IP66 against powerful water jets). One-piece stainless flange nuts ensure safe connections. Breakout tabs let wires access from any direction. It's ignition protected, safe for gasoline-powered boats. This switch connects a single battery to a single load group. Specifications: Single Circuit ON-OFF switch, black color, 2 switch positions, no battery combine, no alternator field disconnect, 48vDC max voltage, 3/8' stud size, 120 in-lb (13.56 Nm) terminal stud torque, 300A continuous rating, 500A (5 min) intermittent rating, 900A cranking rating for 30 sec, 1 battery input, 1.12in (28.45 mm) cable clearance for 4/0 AWG cables, 4/0 AWG (120mm ) cable size for ratings, mounting holes accept #10 screws, tinned copper stud material, 120 in-lb (13.56 Nm) stud torque, 3/8' - 16 (M10) terminal stud size.
Using this Blue Sea battery switch is easy. First, make sure your battery is disconnected before installation. Connect the battery to the switch using the appropriate 4/0 AWG cables. The switch can be mounted on the surface, rear, or front panel as per your need. Once installed, you can simply turn the knob to switch the battery on or off. Remember, this switch is designed for a single battery and a single load group. It's safe for gasoline-powered boats, but always ensure proper ventilation when using it. For maintenance, check the connections regularly to make sure they're tight. Clean the switch with a dry cloth to keep it in good condition. If you notice any signs of corrosion on the studs, you may need to replace the switch or take appropriate measures to prevent further damage.
