Echonautics Hydrodynamic Fairing Block f/CB101 Series Transducers [K10TDD001A]

Enhance your boating experience with Echonautics' Hydrodynamic Fairing Block designed for CB101 Series Transducers. These fairing blocks are essential for thru - hull installation of traditional stem transducers. Installing a fairing block on your vessel's hull not only protects the transducer but also ensures top - notch performance while you're on the move. It guarantees a smooth, bubble - free water flow over the transducer face. Fairing blocks are crucial to match the deadrise angle at the mounting location. By mounting the transducer parallel to the water surface, they direct the sound beam straight down. Made of high - impact polymer, these high - performance fairing blocks offer excellent transducer performance even at speeds above 15kn (17MPH). Inside the box, you'll find a High - Performance Fairing Block model CB101 / CB131, an anti - rotation bolt with nut, washer, and round tap, plus a Warning and Installation Manual.

Using your Echonautics Hydrodynamic Fairing Block is simple. First, refer to the Installation Manual that comes in the box to find the right mounting location on your vessel's hull that matches the deadrise angle. Make sure to clean the mounting area before installation. Then, attach the anti - rotation bolt with the nut, washer, and round tap as instructed. When your vessel is underway, the fairing block will keep the transducer protected and ensure a bubble - free water flow for accurate readings. As for maintenance, regularly check the fairing block for any signs of damage or wear, especially after high - speed trips. If you notice any cracks or loose parts, replace them immediately. Keep the fairing block clean by washing it with mild soap and water after each use. Avoid using harsh chemicals as they may damage the high - impact polymer material.