Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1 x 12 - 3-Pack - Red [307624]

Get this pack of 3 red adhesive lined heat shrink tubing sections. Each section is 12 feet (30.5cm) long with a 1-inch (25.4mm) diameter that shrinks to 5/16 inch (7.9mm). Ideal for wire range 2 - 4/0 AWG. It features cross-linked polyolefin tubing, stronger than PVC and non - flammable. The heat - activated adhesive lining offers an impervious seal against salt water, oil, acids, and sunlight, and provides strain relief. It has a high shrink ratio, shrinking to 1/3 of its original size at 257°F / 125°C. The operating temperature ranges from -40°C to 110°C and it's UL 224 listed. Warning: This product may expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), known in California to cause cancer, birth defects, or other reproductive harm. Check P65Warnings.ca.gov for more info. Specifications: Type - Heat Shrink, Box Dimensions: 2'H x 3'W x 15'L, Weight: 0.2 lbs, UPC: 091887974133.

Using this heat shrink tubing is easy. First, select the right size for your wire from the 2 - 4/0 AWG range. Slide the tubing onto the wire before you make any connections. Then, use a heat source like a heat gun to apply heat evenly around the tubing. Once it reaches 257°F / 125°C, it will shrink to 1/3 of its original size. Remember, this product can expose you to harmful chemicals, so make sure to work in a well - ventilated area. When not in use, store it in a cool, dry place away from direct sunlight and chemicals. If you notice any damage to the tubing, don't use it as it may not provide a proper seal.