Ancor Heavy Wall Heat Shrink Tubing - 3/4 x 3 - 2-Pack - Black/Red [326202]

Heavy Wall Heat Shrink Tubing - 3/4'(19mm) x 3'(7.6cm) - 2-Pack (1 Black & 1 Red)

Each pack includes one black and one red section. These tubes are 3 feet long with a 3/4-inch diameter that shrinks down to 1/4-inch. They're suitable for wire gauges from 8 to 2/0 AWG.

Key Features:

• Cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC.
• The heat-activated adhesive lining creates a tight seal against salt water, oil, acids, and sunlight. It also relieves strain on wires.
• Has a 3:1 shrink ratio.
• Shrinks at 257°F (125°C).
• Works well in temperatures from -40°C to 110°C.
• Meets UL 224 standards.

WARNING: This product can expose you to chemicals like di(2-ethylhexyl)phthalate (DEHP), which is known in California to cause cancer, birth defects, or other reproductive harm. For more info, visit P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 3'W x 5'L, Weight: 0.2 lbs
• UPC: 091887328301

Using this heat shrink tubing is easy. First, pick the right color tube for your needs, either black or red. Slide the tube onto the wire you want to protect. Make sure the wire gauge is between 8 and 2/0 AWG. Then, use a heat source like a heat gun to heat the tube. The tube will start to shrink once it reaches 257°F (125°C). Keep heating evenly until it fully shrinks to 1/4-inch in diameter. As it shrinks, the adhesive lining will create a tight seal. When using this product, be aware of the warning about DEHP. It's important to work in a well - ventilated area. For maintenance, just check the tubes regularly to make sure the seal is still intact. If the tubes are exposed to extreme temperatures outside the -40°C to 110°C range, replace them to ensure proper protection.