Ancor Heavy Wall Heat Shrink Tubing - 1 x 48 - 1-Pack - Black [327148]

Get this single pack of black heavy wall heat shrink tubing. Each section is 48' (122cm) long with a 1' (25mm) diameter that shrinks to 3/8' (9mm). It's suitable for wire range 2 - 4/0 AWG. The cross - linked polyolefin tubing is stronger than PVC and won't burn like PVC. The heat - activated adhesive lining seals out salt water, oil, acids, and sunlight and provides strain relief. It has a 3:1 shrink ratio, shrinks at 257°F / 125°C, and has an operating temperature range from - 40°C to 110°C. It's UL 224 listed. Warning: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp) which may cause cancer, birth defects or other reproductive harm. Check P65Warnings.ca.gov for more info. Specifications: Heat shrink type, box dimensions 1'H x 1'W x 48'L, weight 0.2 lbs, UPC 091887809350.

Using this heat shrink tubing is easy. First, pick the right size for your wire which should be in the 2 - 4/0 AWG range. Slip the tubing over the wire where you need it. Then, use a heat source to heat the tubing until it reaches 257°F / 125°C. As it heats, it will shrink down to 3/8' (9mm) in diameter. Be careful not to overheat it as it can damage the tubing. Since it can expose you to harmful chemicals, wear gloves when handling it. Store it in a cool, dry place away from direct sunlight and heat to maintain its quality. Also, make sure to check the operating temperature range of - 40°C to 110°C before using it in different environments.