Ancor Heavy Wall Heat Shrink Tubing - 3/4 x 12 - 3-Pack - Red [326624]

Red Heavy Wall Heat Shrink Tubing - 3/4' x 12', 3-Pack

This pack includes 3 red sections, each 12 feet (30.5 cm) long, with a 3/4-inch (19 mm) diameter that shrinks down to 1/4-inch (6.4 mm). It's suitable for wire range 8 - 2/0 AWG.

Features:

• Cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC.
• The heat-activated adhesive lining seals out salt water, oil, acids, and sunlight, and provides strain relief.
• It has a 3:1 shrink ratio.
• Starts shrinking at 257°F / 125°C.
• Operates in a temperature range from -40°C to 110°C.
• It meets UL 224 standards.

WARNING: This product can expose you to chemicals like di(2-ethylhexyl)phthalate (DEHP), known in California to cause cancer, birth defects, or other reproductive harm. For more info, go to P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 3'W x 12'L, Weight: 0.1 lbs
• UPC: 091887328608

Using this heat shrink tubing is easy. First, cut the tubing to the length you need from the 12 - foot sections in the 3 - pack. Then, slide the tubing over the wire or object you want to protect. Make sure the wire size is within the 8 - 2/0 AWG range. Use a heat source to heat the tubing until it reaches 257°F (125°C). As it heats, the tubing will shrink down to 1/4 - inch diameter, creating a tight seal. The adhesive lining will also activate, providing extra protection against elements. Remember, this product contains chemicals that can be harmful, so always handle it in a well - ventilated area. If you're in California, be aware of the potential risks. To maintain the tubing, keep it stored in a cool, dry place away from direct sunlight and extreme temperatures. This will help ensure it stays in good condition for future use.