Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/4 x 12 - 4-Pack - Red [306624]

Get this 4-pack of red adhesive lined heat shrink tubing (ALT). Each section is 12 feet (30.5cm) long with a 3/4-inch (19mm) diameter that shrinks to 1/4-inch (6.4mm). It's suitable for wire range 8 - 2/0 AWG. Key features: Cross-linked polyolefin tubing is stronger than PVC and won't burn. The heat-activated adhesive lining seals against salt water, oil, acids, and sunlight, and relieves strain. It has a high shrink ratio, shrinking to 1/3 of its original size at 257°F / 125°C. The operating temperature ranges from -40°C to 110°C and it's UL 224 compliant. WARNING: This product exposes you to chemicals like di(2-ethylhexyl)phthalate (dehp) which may cause cancer, birth defects or other reproductive harm. See P65Warnings.ca.gov for more info. Specifications: Type - Heat Shrink, Box Dimensions - 2'H x 3'W x 15'L, Weight - 0.2 lbs, UPC - 091887308198.

Using this heat shrink tubing is easy. First, make sure your wire is clean and dry. Slide the tubing onto the wire where you need it. Then, use a heat source like a heat gun. Keep the heat gun moving around the tubing evenly to avoid overheating. The tubing will start to shrink at 257°F / 125°C. Once it's shrunk to fit the wire, you're good to go. As for safety, remember that this product contains chemicals that can be harmful. So, work in a well - ventilated area. And if you're in California, be aware of the cancer and reproductive harm warnings. For maintenance, store the tubing in a cool, dry place away from direct sunlight. This will help keep the adhesive lining and the tubing itself in good condition.