Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/4 x 3 - 3-Pack - Black [306103]

3-Pack Black Adhesive Lined Heat Shrink Tubing (3/4' x 3')

Get a package of 3 black sections, each 3'(7.6cm) long with a 3/4'(19mm) diameter that shrinks down to 1/4'(6.4mm). Ideal for wire range 8 - 2/0 AWG.

Features:

• The cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC, ensuring long - lasting use.
• The heat - activated adhesive lining seals out salt water, oil, acids, and sunlight, and also relieves strain on wires.
• It has a high shrink ratio, shrinking to 1/3 of its original size.
• Shrinks at 257°F / 125°C.
• Operates in a temperature range from -40°C to 110°C.
• UL 224 certified for quality.

WARNING: This product can expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), known in California to cause cancer, birth defects, or other reproductive harm. For more info, visit P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 3'W x 4'L, Weight: 0.3 lbs
• UPC: 091887305623

Using this heat shrink tubing is easy. First, make sure your wires are clean and dry. Slide the tubing onto the wire you want to protect. Then, use a heat source like a heat gun. Set the heat gun to around 257°F / 125°C and slowly move it around the tubing. As the tubing heats up, it will shrink to fit snugly around the wire. The adhesive lining will also activate and create a tight seal. Remember, this product contains chemicals that can be harmful, so always work in a well - ventilated area. Avoid direct contact with your skin and eyes. When storing the tubing, keep it in a cool, dry place away from direct sunlight. This will help maintain its quality over time.