Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2 x 3 - 2-Pack - Black/Red [305602]

Get this 2-pack of Ancor Adhesive Lined Heat Shrink Tubing (ALT) with one black and one red piece. Each section is 3 feet (7.6 cm) long and has a 1/2-inch (12.7 mm) diameter, shrinking down to 5/32 inches (4 mm). It's suitable for wire sizes 8 - 4 AWG. This tubing is made of cross-linked polyolefin, much stronger than PVC and won't burn like it. The heat-activated adhesive lining seals out salt water, oil, acids, and sunlight, and provides strain relief. It has a high shrink ratio, shrinking to 1/3 of its original size at 257°F / 125°C. The operating temperature ranges from -40°C to 110°C and it's UL 224 compliant. Warning: This product may expose you to di(2-ethylhexyl)phthalate (dehp), a chemical known to cause cancer, birth defects or other reproductive harm in California. Check P65Warnings.ca.gov for more info. Specifications: Type - Heat Shrink, Box Dimensions - 1'H x 2'W x 4'L, Weight - 0.2 lbs, UPC - 091887973983.

Using this adhesive lined heat shrink tubing is easy. First, choose the right size for your wire, which is 8 - 4 AWG for this product. Slide the tubing onto the wire before you make any connections. Once it's in place, use a heat source like a heat gun to apply heat evenly. The tubing will start to shrink at 257°F / 125°C and form a tight seal around the wire. Remember, this tubing has a high shrink ratio and will shrink to 1/3 of its original size. There are a few things to keep in mind. This product contains di(2-ethylhexyl)phthalate (dehp), a chemical that can cause health problems, so handle it with care. Also, make sure to work in a well - ventilated area. For maintenance, just keep the tubing away from sharp objects that could damage it. Store it in a cool, dry place, and it should last a long time within its operating temperature range of -40°C to 110°C.