Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/4 x 12 - 10-Pack - Red [303624]

Adhesive Lined Heat Shrink Tubing (ALT) - 1/4' x 12' - 10-Pack - Red

Get a pack of 10 red heat shrink tubing sections, each 12' (30.5cm) long and with a 1/4' (6.4mm) diameter that shrinks down to 5/64' (2mm). It's suitable for wire range 16 - 10 AWG.

Features:

• The cross - linked polyolefin tubing is stronger than PVC and won't burn like PVC, offering great durability.
• The heat - activated adhesive lining seals out salt water, oil, acids, and sunlight, and also relieves strain on wires.
• It has a high shrink ratio, shrinking to 1/3 of its original size.
• Shrinks at 257°F / 125°C and has an operating temperature range from - 40°C to 110°C.
• It meets UL 224 standards.

WARNING: This product can expose you to chemicals including di(2 - ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 4'W x 13'L, Weight: 0.1 lbs
• UPC: 091887973914

Using this adhesive lined heat shrink tubing is easy. First, select the right size tubing for your 16 - 10 AWG wire. Slide the tubing onto the wire before making any connections. Then, use a heat source like a heat gun to apply heat evenly around the tubing. Once it reaches 257°F / 125°C, it will start to shrink down to 1/3 of its original size and form a tight seal. Be careful when using the heat source to avoid overheating or causing damage. Also, remember that this product contains chemicals that can be harmful, so follow the warning on the label. When it comes to maintenance, store the tubing in a cool, dry place away from direct sunlight and harsh chemicals. This will help keep it in good condition for future use.