Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 3/8 x 12 - 5-Pack - Black [304124]

Adhesive Lined Heat Shrink Tubing (ALT) - 5-Pack Black 3/8' x 12'

This pack includes 5 black sections, each 12 feet (30.5cm) long with a 3/8-inch (9.5mm) diameter that shrinks down to 1/8-inch (3.2mm). It's suitable for wire range 12 - 8 AWG.

Features:

• The cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC.
• The heat-activated adhesive lining seals out salt water, oil, acids, and sunlight, and provides strain relief.
• It has a high shrink ratio, shrinking to 1/3 of its original size.
• It starts to shrink at 257°F / 125°C.
• It can operate in a temperature range from -40°C to 110°C.
• It meets UL 224 standards.

WARNING: This product exposes you to chemicals like di(2-ethylhexyl)phthalate (dehp), known in California to cause cancer, birth defects, or other reproductive harm. For more info, go to P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 3'W x 15'L, Weight: 0.1 lbs
• UPC: 091887303407

Using this adhesive lined heat shrink tubing is easy. First, pick the right piece for your wire. It's suitable for wires in the 12 - 8 AWG range. Slide the tubing over the wire where you need it. Then, use a heat source like a heat gun. When the tubing reaches 257°F or 125°C, it'll start to shrink down to 1/3 of its original size. The heat - activated adhesive inside will create a great seal against things like salt water, oil, and acids. Just make sure to keep the heat source moving evenly to avoid overheating. Remember, this product can expose you to chemicals that are harmful, so work in a well - ventilated area. To maintain it, store the tubing in a cool, dry place. Avoid storing it in direct sunlight or near sources of heat. This will help keep the tubing in good condition for future use.