Ancor Heavy Wall Heat Shrink Tubing - 3/4 x 3 - 3-Pack - Red [326603]

3-Pack Red Heavy Wall Heat Shrink Tubing - 3/4'(19mm) Diameter, 3'(7.6cm) Long

This pack includes 3 red sections of heat shrink tubing. Each section is 3'(7.6cm) long with a 3/4'(19mm) diameter that shrinks down to 1/4'(6.4mm). It's suitable for wire range 8 - 2/0 AWG.

Key Features:

• Cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC.
• The heat-activated adhesive lining creates an impervious seal against salt water, oil, acids, and sunlight. It also provides strain relief.
• It has a 3:1 shrink ratio.
• Starts shrinking at 257°F / 125°C.
• Operates in a temperature range from -40°C to 110°C.
• Meets UL 224 standards.

WARNING: This product can expose you to chemicals like di(2-ethylhexyl)phthalate (dehp), which is known in California to cause cancer, birth defects, or other reproductive harm. For more info, visit P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 3'W x 4'L, Weight: 0.1 lbs
• UPC: 091887328400

Using this heat shrink tubing is easy. First, select the right size tubing for your wire, which should be in the 8 - 2/0 AWG range. Slide the tubing onto the wire you want to cover. Then, use a heat source like a heat gun to heat the tubing evenly. Once it reaches 257°F / 125°C, it will start to shrink down to 1/4'(6.4mm). Make sure to heat it slowly and carefully to ensure a good seal. As for maintenance, keep the tubing in a cool, dry place. Avoid exposing it to extreme temperatures outside the -40°C to 110°C operating range. Also, be aware of the warning. This product contains chemicals that can cause health issues, so handle it with care. If you have any concerns, check P65Warnings.ca.gov for more information.