Ancor Heavy Wall Heat Shrink Tubing - 3/4 x 48 - 1-Pack - Black [326148]

Heavy Wall Heat Shrink Tubing - 3/4' x 48' - 1-Pack - Black

This pack includes one 48-foot (30.5 cm) long black tubing section with a 3/4-inch (19 mm) diameter that shrinks down to 1/4-inch (6.4 mm). It's suitable for wire range 8 - 2/0 AWG.

Features:

• The cross-linked polyolefin tubing is stronger than PVC and won't burn like PVC, ensuring long - lasting use.
• The heat - activated adhesive lining offers a tight seal against salt water, oil, acids, and sunlight. It also provides strain relief for your wires.
• It has a 3:1 shrink ratio.
• It starts shrinking at 257°F / 125°C.
• It can operate in a temperature range from - 40°C to 110°C.
• It meets UL 224 standards.

WARNING: This product may expose you to chemicals like di(2 - ethylhexyl)phthalate (dehp), which is known in California to cause cancer, birth defects, or other reproductive harm. For more info, visit P65Warnings.ca.gov.

Specifications:

• Type: Heat Shrink
• Box Dimensions: 1'H x 1'W x 49'L, Weight: 0.2 lbs
• UPC: 091887809336

Using this heat shrink tubing is easy. First, make sure the tubing is the right size for your wire. Slip the tubing over the wire you want to protect. Then, use a heat gun or a similar heat source to apply heat evenly around the tubing. Once it reaches 257°F (125°C), it will start to shrink down to a 1/4 - inch (6.4 mm) diameter. Be careful when using the heat source to avoid overheating. This tubing can work well in a temperature range from - 40°C to 110°C, but try to keep it within normal operating conditions. After use, store it in a cool, dry place. Also, remember that this product can expose you to harmful chemicals, so handle it with care and refer to P65Warnings.ca.gov for more information.