Blue Sea Systems 20A 8 - Circuit Terminal Block
Model: 2408 - BSS
- The closed - back design offers full insulation of power from the mounting surface.
- Each screw pair forms an isolated circuit.
- Use jumpers to create common circuits easily.
Specifications| Circuits | 8 |
| Length | 2.17in (55.12 mm) |
| Max Voltage | 300V AC/DC |
| Continuous Rating | 20A |
| Base Material | UL 94 V0, PC |
| Bus Material | Nickel - Plated Brass |
| Mounting Screw | #6 [M3.5] |
| Screw Material | Stainless Steel |
| Screw Terminal Torque | 7 in - lb (0.79 Nm) |
| Terminal Screws | M3.5 |
| Wire Terminal Size | #6 [M3] |
Using this Blue Sea terminal block is quite straightforward. First, make sure to turn off the power before installation. Locate a suitable mounting surface and use the #6 [M3.5] mounting screws to secure the block. Then, connect your wires to the M3.5 terminal screws, tightening them to the recommended 7 in - lb (0.79 Nm) torque. You can use jumpers to link circuits as needed. When it comes to safety, always keep the power off during installation and maintenance. Avoid overloading the block beyond its 20A continuous rating and 300V AC/DC maximum voltage. For maintenance, periodically check the screws for tightness and ensure the block is clean and free from debris. If you notice any signs of wear or damage, replace the terminal block promptly.
