Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1 x 48 - 1-Pack - Black [307148]

This package contains one black adhesive lined heat shrink tubing. Each tube is 48' (122cm) long with a 1' (25.4mm) diameter that shrinks to 5/16' (7.9mm). It's suitable for wire range 2 - 4/0 AWG. The cross - linked polyolefin tubing is stronger than PVC and won't burn like PVC. The heat - activated adhesive lining seals out salt water, oil, acids, and sunlight, and provides strain relief. It has a high shrink ratio, shrinking to 1/3 of its original size at 257°F / 125°C. It operates in a temperature range of - 40°C to 110°C and is UL 224 compliant. Warning: This product can expose you to dehp, a chemical known to California to cause cancer, birth defects or other reproductive harm. Check P65Warnings.ca.gov for more info. Specifications: Type - Heat Shrink, Box Dimensions - 1'H x 1'W x 48'L, Weight - 0.5 lbs, UPC - 091887808575.

Using this adhesive lined heat shrink tubing is easy. First, make sure your wire is clean and dry. Slip the tubing over the wire. Then, use a heat source like a heat gun. Heat the tubing evenly until it reaches 257°F (125°C) and shrinks to 1/3 of its original size, forming a tight seal around the wire. Be careful when using a heat source to avoid burns. Also, note that this product contains chemicals that can be harmful, so avoid direct contact with your skin. For maintenance, store the tubing in a cool, dry place away from direct sunlight. This will help keep the tubing in good condition for future use.